Australian State and Territory Tinting Laws

Please check your local state laws. Note that regulations may be different for commercial vehicles.

ACT

NSW

NT

  • Northern Territory Vehicle Standards
  • Window Tinting Bulletin

SA

  • Road Traffic Rules

QLD

TAS

VIC

WA

Safe driving requires the driver to have the best possible vision of the road users. Any reduction in driver visibility particularly in poor light conditions will lead to a reduction in safety.

Vehicle Standard

Safe driving requires the driver to have the best possible vision of the road users. Any reduction in driver visibility particularly in poor light conditions will lead to a reduction in safety.

Tinted windows may reduce driver vision if not applied accordingly to state and territory regulations. Therefore it is desirable that the light transmittance of windows on a motor vehicle is not reduced below 35%*.

A tinted or opaque band across the top of the windscreen is permitted providing it is no lower than 10% of the height of the windscreen & is above the portion of the windscreen swept by the wipers. Tinted film must not be reflective or mirror like as it can dazzle other drivers by relecting sunlight or headlight beams.

Vehicle with factory-tinted glass

Most new vehicles are fitted with tinted window glass. This tint is very light and glass may at first appear to be clear. To check, hold a piece of white paper on the opposite side of the glass. If it has a slight gray, green or brown colour when viewed through the glass, then the glass is tinted.

Special grades of film may be applied to factory tinted windows. When these films are applied to tinted glass, the combination of tints must still allow 35% visual light transmittance**.

http://www.wfaanz.org.au/ForYourCar.htm